Filter
Top Products
SMART 216 / 232 IP
31
26.5 Power cycle
Where a Minicom Serial Remote Power Switch is connected to Serial 1 port of the
IP Control, you can power manage the Target servers as follows:
From the Toolbar, click . The Power menu appears, see below.
Figure 31 Power menu
To send a power cycle command or to power down or up the currently accessed
Target server, select the appropriate option.
Note! Only the currently accessed Target server is affected, so to power manage
other Target servers you must access each one individually.
26.6 Keyboard key sequences
Click . A list of defined keyboard sequences appears. When clicked, these
transmit directly to the Target server, and will not affect the Client computer.
For example, select Ctrl-Alt-Del to send this three key sequence to the Target
server to initiate its Shutdown/Login process.
To add a keyboard sequence:
Click Add/Remove. The Special Key Manager box appears see Figure 32.
Figure 32 Special Key Manager box
To add a predefined sequence:
1. Click Add Predefined. A list of sequences appears.