Filter
Top Products
DS VISION 3000
19
The table below explains the functions of the Control icons:
Icon Function
Video broadcasting to remote unit
Audio broadcasting to remote unit
Serial command to remote unit
Bi-directional Serial command
Selecting the ports to command
You can select the ports to command in any of the following ways.
From the topology on the left hand side:
Tick the individual checkboxes of the units you want to send a command. Or tick
the desired Group – all commands will then be sent to all units in the Group.
From the icons on the right hand side:
Click an icon to select it. To select more than one icon, hold down Shift or Ctrl and
select the desired icons.
Selecting all
To select all:
Choose Edit/Select All.
Sending commands
Once the desired units are selected send the desired command by pressing the
appropriate Control icon. By default all signals (video, audio, Serial) are broadcast.
Sending/blocking video
Click to toggle between sending and blocking video. When receiving video
the device icons appear like this: .
When not receiving video the device icons appear like this: .