Filter
Top Products
USER GUIDE
28
Note! Update the DDC information if you add or replace a monitor with a different
resolution / refresh rate.
Get stored DDC button – Once you have saved the DDC information of a
Receiver’s monitor on a computer’s hard disk, you can retrieve this information
using the Get stored DDC button if for example you dismantle and then re-install
the system.
Service
To restore factory defaults press Restore to factory settings. Note! All configuration
and tuning adjustments will be lost.
Broadcaster’s Local Serial port
This is for Serial control of the local monitor. There are 2 options.
· Enable - Connects the system serial data to the local monitor- downstream
only.
· Bi directional - Enables serial bi-directional connections with the local
monitor – like any remote monitor in the system.
16. Security
Choose Tools/Options. In the Preferences window click Security. The Security
screen appears.
Figure 31 security window
Here you can set up a password to require password access to the service Utility.