Filter
Top Products
USER GUIDE
24
Remote tuner at the
screen
Receivers
Broadcaster
Line Splitter
DS Vision Service
Utility installed here
Player - IP: 192.168.111.132
LAN
http://192.168.111.132
Figure 26 Remote tuning
At the player the setup is done as follows:
1.Connect the Serial Download cable to the Broadcaster/Transmitter and player.
2. Open the Service Utility and choose Tools/Options, the Preferences window
appears, see Figure 16 above.
3. Select the Enable Remote Control checkbox, the software starts a small web
server in the background allowing other computers on the network to access it.
The Check Remote Control button un-grays. Click the button to display a local
browser to indicate that the remote option is enabled and functioning.
4. To verify the IP address of the player, click Start/Run, type “CMD” press Enter,
type “IPConfig” press Enter. The IP address appears.
The tuning at the remote laptop/device is done as follows:
1. Open a browser and type the IP address of the player. For example in Figure 26
the remote tuner accesses the tuning facility by typing the IP address
http://192.168.111.132.
2. Press Enter. A list of all Receivers Long and Line Splitters connected to the
player appears, see Figure 27.