Filter
Top Products
6.2 UNIX Printing
6-19
TCP/IP Configuration
Chapter 6
6. When a window appears, change the values shown to configure
the NIC. The values displayed are default values. You must
replace the short and long form filter values with the values
shown below.
7. After you have replaced all values, press .
You can now print.
6.2.2.3 Setting Up an AIX 4.0 System
Use the following procedures to install a NIC in an AIX 4.0 system:
1. Run SMIT Printer.
2. Select
Print Spooling
.
3. Select
Add a Print Queue.
4. Select
Remote
.
5. Use
Standard Processing
.
6. Assign a queue name.
7. Use the host address of the NIC for the Remote System.
8. Use
PORT1
for the queue on the remote system.
9. Add a description (optional).
10. Press to generate.
Requested Informa-
tion Input Data
Example
Description of
Input Data
Name of queue to add printer1 Name of local
printer
queue Destination
Host
printfast NIC hostname as in
/etc/hosts
Short Form Filter /usr/lpd/bsdshort Required value
Long Form Filter /usr/lpd/bsdlong Required value
Name of remote
printer queue
PORT1 NIC
Name of device to add print1 Name of local
queue
Enter
Enter
PageWorks.book Page 19 Tuesday, August 4, 1998 11:21 AM