Filter
Top Products
3.2 IP Peer-to-Peer Printing Program
3-7
Utilizing Windows Programs
Chapter 3
3.2 IP Peer-to-Peer Printing Program
This section describes how to set up and use the IP Peer-to-Peer
Printing program. With the setup procedure, you set up your print
server ports for printing from a Windows environment.
3.2.1 Installing the IP Peer-to-Peer Printing
Program
Use the following procedure for automatic installation of the IP Peer-
to-Peer Printing Program. If the opening screen does not appear as
described in step 1, follow the instructions for the manual installation
procedure.
1. Insert the CD-ROM into your workstation’s CD-ROM drive. The
opening screen appears automatically.
2. Click the
CD-ROM Contents
button to display the
Introduction
screen.
3. Click
Installation/Configuration Programs
located at the bottom
of the
Introduction
screen.
4. Select the program that you want to install and follow the instruc-
tions displayed on the screen.
You can use the following procedure to manually install the IP Peer-to-
Peer Printing program.
1. Insert the CD-ROM into your workstation’s CD-ROM drive.
2. Run the program. (In this example, we assume that D: is drive
your workstation’s CD-ROM drive.)
D:\Ip-P2p\Setup.exe
3. Follow the instructions that appear on the screen.
The default installation directory is C:\Program Files\P2p-ip. You can
change to a different directory if you want.
PageWorks.book Page 7 Tuesday, August 4, 1998 11:21 AM