Filter
Top Products
4.2 Configuring NetWare 4.x — Bindery Emulation
4-12
NetWare Configuration
Chapter 4
Use Quick Setup to connect your print server, print queue and
printer correctly. You can modify these later if you need to.
5. Select
Print server and press to modify the entry.
6. Type the name of the print server in the
Print server field and
press .
Note
7. Press to move to the New printer field. Type a name and press
.
8. Press to move to the
New print queue field. Type a name and
press .
9. Press to move to the
Printer type field and press . From
the list of printer types, select
Other/Unknown and press .
10. When you are finished, press to save the configuration.
Repeat steps 5 through 10 for each file server that the printer
server services.
11. To view, add, delete, or modify print servers or queues after the
initial setup, select either the
Print Queues or Print Servers
option on the
Available Options screen.
• The print server name is printed under the Novell Network Information
on the status report. The factory default name is MLT_<serial num-
ber>.
F3
Enter
Enter
Enter
Enter
Enter
F10
Chap4.fm Page 12 Monday, August 17, 1998 9:58 AM