Filter
Top Products
3-2
Paper
Using the Printer
Chapter 3
Envelopes (Tray 1 and Manual Feed Tray)
• Specialty paper is not supported for duplex printing.
Note
Paper
Feeding
Port
Env. Com10
105
×
241mm
4-1/8"
×
9-1/2"
Env. DL
110
×
220mm
4-5/16"
×
8-11/16"
Env. C5
162
×
229mm
6-3/8"
×
9"
Env. Monarch
98
×
190mm
3-7/8"
×
7-1/2"
Tray 1
Manual
Feed Tray
• Do not use the following types of paper to avoid reduced print quality,
a misfeed or a print failure.
✓ Paper already used in a thermal transfer printer or ink jet printer.
✓ Paper that is too thin or too thick.
✓ Paper folded, curled or torn.
✓ Paper having binding holes or perforations.
✓ Paper with surfaces that are too smooth or too rough or with varying
surfaces.
✓ Paper having special coatings on their surfaces such as carbon
paper, heat-sensitive paper and pressure-sensitive paper.
✓ Sheets of various sizes.
✓ Paper not cut on right angles.
✓ Paper bound by glue, staples or clips.
✓ Paper affixed with labels which are easy to peel.
✓ Post cards that are warped or bent.
• Envelopes should meet the following requirements:
✓ Sharp folds and edges.
✓ General mailing envelopes without seals on the glued portion.
✓ Having flaps the full width of the envelope (unacceptable if the flap
is glued).
✓ Wrinkle-free, no fasteners.
• Generally, envelopes perform well, but some types may wrinkle. We
strongly recommend testing any type of envelope before buying it in
large amounts.
• For more information, refer to “Loading Paper”.