Minolta DI3510 Network Hardware User Manual


 
7
7.1 Specifying Finishing Settings
7-8 Di2010/Di2510/Di3010/Di3510
Specifying Copy Settings Chapter 7
4 Touch the button for the desired stapling
position.
5 Touch [Enter].
6 Press the [Start] key.
The copies are printed.
Note
A stapling setting cannot be selected if another job has been interrupted.
When making copies while using a staple setting, be careful of the selected sta-
pling position.
For details, refer to page 7-11.
If Corner Staple was selected, the stapling position cannot be specified. How-
ever, if the Corner Staple setting is used together with the Hole Punch set-
ting, the stapling position can be specified.
If a document positioned on the original glass is copied using a stapling setting,
copying is automatically performed using the Separate Scan function.
For details, refer to Auxiliary Functions in the Advanced Operations volume of
the User Manual.
When copying while using a stapling setting, be sure that the maximum number
of pages that can be stapled together is not exceeded.
Where you do not set the position, the stapling position is automatically speci-
fied.