Filter
Top Products
7
7.2 Specifying a Zoom Setting
7-14 Di2010/Di2510/Di3010/Di3510
Specifying Copy Settings Chapter 7
7.2 Specifying a Zoom Setting
Copies of documents can be enlarged or reduced.
In the touch panel, touch [Basics], and then touch [Zoom]. A screen appears, show-
ing the available Zoom settings.
There are eight ways to change the zoom ratio.
● Auto Size
The most appropriate zoom ratio based on the size of the document loaded and
the specified paper size is automatically selected.
● Full-Size
A copy that is the same size as the document (× 1.000) is selected.
● Enlarge
Various zoom settings for making enlarged copies from common standard doc-
ument sizes to standard paper sizes are available.
For example:
❍ A Letter-size document can be copied onto the larger 11 × 17-size paper.
❍ A Legal-size document can be copied onto the larger 11 × 17-size paper.
● Reduce
Various zoom settings for making reduced copies from common standard doc-
ument sizes to standard paper sizes are available.
For example:
❍ An 11 × 17-size document can be copied onto the smaller Letter-size paper.
❍ A Legal-size document can be copied onto the smaller Letter-size paper.
● Minimal
The copy is slightly reduced (× 0.930).
❍ Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
❍ The zoom ratio of the “Minimal” setting can be changed to any ratio between
× 0.900 and × 0.999.