Filter
Top Products
14
Pro Series
Date of manufacture
1826
Enabled
Enabled
UPS output
85 VAC (170 for 230
VAC models)
Use this function to uniquely
identify the UPS in your net-
work configuration
Enter the current date when
replacing batteries
When enabled, the UPS will
automatically restart from a
low battery shutdown
when normal A/C returns
Enabled - the UPS will emit
a short beep when in the
battery mode. At Low Bat-
tery the UPS will emit two
tonesfrom low battery
warning until shutdown.
Disabled - Use only when
software is controlling the
UPS or to silence the alarm
UPS Output - When the UPS
is told to shut down, it turns
off the UPS output only. UPS
- Turns off the UPS which
requires the UPS to be
turned on manually
Changes the voltage point
at which the UPS switches
to battery power
(These items require optional software or hardware)
FUNCTION
FACTORY DEFAULT
DESCRIPTION
Up to 64 characters to
define the UPS
Date of battery re-
placement -
day/month/year
XX/XX/XXXX
Up to 5 characters
Enable or disable
Enabled, at low bat-
tery, disabled
UPS output or UPS
85 or 80 or 75 VAC
(170 or 160 or 150
VAC for 230 VAC
models)
USER CHOICES
UPS ID
Battery install
date
Battery life in
days
Enable/
Disable auto
resstart
Set audible
alarm state
Shutdown
Type
Set low volt-
age Xfer point
9
At first battery replacement,
reset to reflect actual num-
ber of days experience in
your
environment or leave fac-
tory default.
CONFIGURABLE PARAMETERS
& SETTINGS
English