Filter
Top Products
13
DIAMOND VIEW
Auto Exit Enter
Auto Exit Enter
Auto Automatically adjusts the vertical position, pixel phase,
horizontal position and pixel clock.
Exit Return to the main menu or exit the OSD menu without
saving. Press the exit key when the OSD is not displayed
to adjust the audio volume.
Enter Enter sub-menus, select items, save changes.
(decrease) Reduce the value of a setting. Move the selection cursor
to the left. Press to adjust Contrast if the OSD is off.
(increase) Increase the value of a setting. Move the selection cursor
to the right. Press to adjust Brightness if the OSD is off.
To manually adjust the image:
1. Display the adjustment test pattern. This is the best way to observe
changes as you adjust the image. Windows users should run the
Auto.exe test pattern program provided on the Utilities floppy diskette.
For non-Windows operating systems, you also can use the test pattern
described in the previous section or another full-screen image, such as
the desktop of the operating system.
2. Open the OSD menu by pressing the Enter button on the monitor.
3. Press or to select the Geometry submenu and then press Enter.
4. Press or to select Clock and then press Enter.
5. Check the current setting. Increase or decrease the sampling clock to