Filter
Top Products
15
Restoring the Factory Default Settings
Return to the factory settings for any display mode by pressing Enter to
open the OSD, selecting Miscellaneous and then selecting Recall. The
Recall function only affects the graphics mode that is currently displayed.
On Screen Display Functions
The On Screen Display (OSD) provides functions that allow you to adjust
the displayed image, change the audio volume, reset the monitor and get
information about the displayed graphics signal.
The OSD has five functional groups for Luminance, Geometry, Colour,
Miscellaneous functions and Auto Setup.
Luminance Brightness and Contrast
Geometry Horizontal and Vertical Position.
Pixel Clock – Adjusts the sampling frequency for the
Analogue (VGA) to Digital signal conversion.
Phase – Adjusts the phase of the pixel clock to
eliminate sampling noise.
Colour Adjust the Red, Green and Blue colour levels.
Miscellaneous OSD Setting – Change the OSD position.
Language – Select from 8 OSD languages.
Information – Shows the Horizontal and Vertical
frequencies of the current graphics signal.
Recall – Resets the display to factory defaults.
Volume – Sets the audio volume for the speakers.
Auto Setup
The same function as the Auto button. Automatically
adjusts the Geometry based on the displayed image.
Use the test pattern supplied on floppy disk with your
monitor for best results.