Filter
Top Products
ENGLISH
15
Step
4 Disconnect 2 cords connected to the circuit
board on the metal part.
Step
5 Remove the metal part.
• Remove 4 screws on the metal part.
Step
6 Pull out the HDD tray halfway.
Step
7 Remove the cords.
Notice
• Because S-ATA connectors of HDD are very delicate,
connect or disconnect the cords gently without
applying excessive force to the connectors.
Take special care to connect or disconnect the
connectors straight in order to prevent vertical force
from being applied to them.
S-ATA connectors
Step
8 Pull out the HDD tray.
• Pull out the HDD tray completely.
Step
9 Remove the HDD.
• Remove 4 screws securing the HDD and then
remove the HDD from the frame.