Filter
Top Products
EN-25
ENGLISH
How to use the connection software (continued)
4. Select the USB flash drive on which the connection software is
to be installed, and then click the [Next>] button.
• Installation of the connection software starts.
5. Click the [Finish] button.
• The connection software starts automatically by inserting the USB
flash drive on which the connection software is installed into a
computer.
• If the connection software does not start automatically, open the
USB flash drive, and then double-click the "Wireless_Projector"
icon.
• While the connection software installed on a USB flash drive is
running, do not remove the USB flash drive.
Displaying the information about the projector
You can check the IP address and login code of the projector which is
being connected.
1. Click the icon, then select [Info].
2. Click the [OK] button after checking the information.
Displaying the version information of the software
1. Click the icon, then select [About].
2. Click the [OK] button after checking the information.