Filter
Top Products
EN-22
Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Select the DETAIL MENU and press the ENTER button (or
button).
3. Press the
or button to select INSTALLATION.
4. Press the ENTER button (or
button).
5. Press the
or button to select AUTO POWER OFF.
6. Press the
or button to adjust the auto power off time.
7. Exit the menu by pressing the MENU button several times.
Important:
•When the button doesn’t function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
•After selecting the items marked with , press the ENTER but-
ton.
Menu Options
Set the following options provided in the respective menus.
1. IMAGE menu
•You cannot adjust TINT when the TV50 (PAL, SECAM) signal is inputted.
•You cannot adjust COLOR TEMP. when WALL SCREEN in the INSTALLATION menu is set to other than OFF.
•When COMPUTER 1 or COMPUTER 2 or HDMI is selected, TINT do not work.
•When COLOR ENHANCER is switched, projected images may be distorted.
•Captions are not displayed while information about the menu, volume setting, or input signal selection is being displayed on the screen.
•The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in NorthAmerica.
•INPUT LEVEL is unavailable when the digital signal is supplied from the YC
B
C
R
/YP
B
P
R
terminal of the connected device.
opt.
IMAGE
opt.
INSTALLATION
WALL SCREEN
BEIGE
opt.
INSTALLATION
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
OFF
30min
noitpircsed erutaeFgnitteSnoitpo uneM
IMAGE ADVANCED menu
COLOR ENHANCER
AUTO
Automatically sets an optimal color balance based on the input signal.
Use this setting for most cases.
PRESENTATION Makes projected images bright and crisp.
STANDARD Makes projected images look natural.
THEATER Makes projected images soft and smooth. Best suited for movies.
USER
Adjusts the gamma curve, color intensity, or balance. (See page 27.)
CONTRAST ± ).72 egap eeS( .segami detcejorp fo tsartnoc eht stsujdA03
BRIGHTNESS ± ).72 egap eeS( .segami detcejorp fo ssenthgirb eht stsujdA03
COLOR TEMP. 4 options
Adjusts the color temperature. (See page 27.)
COLOR ±10
Adjusts the color tone of projected images. (See page 27.) You cannot
select this setting when the COMPUTER 1 or COMPUTER 2 or HDMI is
selected as the input source.
TINT ±10
Adjusts the color tint of projected images. (See page 27.) You can select
this setting only when NTSC is selected as the input signal.
SHARPNESS ± ).72 egap eeS( .segami detcejorp fo ssenprahs eht stsujdA5
ADVANCED MENU OK
NOISE REDUCTION
ON/OFF Reduces noise of projected images when the input signal is noisy.
CTI ON/OFF Corrects smeared color borders.
INPUT LEVEL
±5
For analog signal input: The input level of video signal differs among
devices to be connected. High input level causes solid white in displayed
image and low input level causes displayed image to get dark. Use this
menu to adjust the input level of analog video signal.
ENHANCED/NORMAL
For digital signal input: When a digital signal is input, ENHANCED and
NORMAL are switchable. (See page
12.)
CLOSED CAPTION
.snoitpac yalpsid ton seoDFFO
CC1/CC2 Displays captions.
CONTRAST
BRIGHTNESS
0
0
STANDARD
0
COLOR
COLOR TEMP.
0
SHARPNESS
AUTO
COLOR
ENHANCER
opt.
IMAGE
0
TINT
OK
ADVANCED MENU
CTI
INPUT LEVEL
0
ON
ON
NOISE REDUCTION
CLOSED CAPTION
OFF
opt.
IMAGE
ADVANCED MENU