Filter
Top Products
EN-20
Menu operation (continued)
2. INSTALLATION menu
• By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,
and you cannot switch the LAMP MODE in about one minute after the lamp is on.
Menu option Setting Feature description
WALL SCREEN
OFF/BEIGE / LIGHT
BLUE / LIGHT
GREEN / PINK /
BLACK BOARD/WHITE
BOARD
Selects a desired setting based on the color of the screen or wall on
which images are projected. (See page 15.) When selecting a setting
other than BLACK BOARD/WHITE BOARD, you can fine-tune the color
tone to the desired level on the 1 to 5 scale.
LAMP MODE
STANDARD Select this setting when you want to view images in a well-lit room.
LOW
Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deteriorated.
STANDBY MODE
STANDARD LAN and MONITOR OUT can be activated in STANDARD MODE.
LOW
Power consumption can be lowered when selecting LOW. However, LAN
and MONITOR OUT cannot be activated.
AUDIO INPUT
AUTO
If AUTO is selected, selects AUDIO 1 when the input source is COM-
PUTER, while selects AUDIO 2 when the input source is VIDEO/S-
VIDEO.
AUDIO 1/AUDIO 2 Select the audio input.
MIX
Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the bal-
ance of AUDIO 1/AUDIO 2 using MIX .
AUTO POWER ON ON/OFF
When this mode is set to ON, the lamp is automatically lit when the
power cord is plugged in the wall outlet. Select ON when you set the
projector at the ceiling.
• When the lamp is off, the projector is in standby. Use the remote
control to turn on the lamp.
AUTO POWER OFF OFF/5-60 min
Selects a desired timer setting until the projector enters the standby
mode when there is no signal input from the source.
SPLASH SCREEN ON/OFF Select ON to display the splash screen when the projector is powered on.
BACK COLOR BLUE/BLACK
Selects the background color that is displayed when there is no signal
input from the source.
IMAGE REVERSE
OFF
Select this setting when you want to view images from the front with the
projector set on the floor.
MIRROR
Select this setting when you want to view images from behind the
screen with the projector set on the floor.
INVERT
Select this setting when you want to view images from behind the
screen with the projector set at the ceiling.
MIRROR INVERT
Select this setting when you want to view images from the front with the
projector set at the ceiling.
LAMP TIME RESET OK Resets LAMP TIME.
INSTALLATION
opt.
ON
SPLASH
SCREEN
WALL SCREEN
LAMP MODE
STANDBY MODE
AUDIO INPUT
AUTO
STANDARD
BEIGE
ON
STANDARD
OFF
IMAGE
REVERSE
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
BACK COLOR
BLUE
LAMP TIME
RESET
OK