Filter
Top Products
EN - 10
S-VIDEO IN
VIDEO IN
AUDIO IN (1/2)
VCR, etc.
to video output
to audio output
to S-video output
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal
computer that have analog RGB output connectors.
Important:
• Make sure that the connected device is turned off before starting connection.
• Plug in the power cords of the projector and the connected devices fi rmly. When unplugging, hold and pull the
plug. Do not pull the cord.
• When the projector and the connected devices are located too close to each other, the projected image may be af-
fected by their interference.
• See the owner's guide of each device for details about its connections.
Projector + AV device
Important:
• Match the colors of the video and audio plugs on the AV cable with those of the terminals.
• Speaker output is mono.
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fi tting (Y, CB, CR). When connecting such DVD player with this
projector, use the COMPUTER/COMPONENT VIDEO IN terminal.
Important:
• The terminal's names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
• The terminal's names vary depending on the connected devices.
• Use a Mini D-SUB 15-pin - BNC conversion cable for connection.
• Image may not be projected correctly with some DVD players.
• When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL
menu.
• Speaker output is mono.
B G R
C
B
(P
B
)Y C
R
(P
R
)
HD/CS VD
COMPUTER/COMPONENT
VIDEO IN
DVD player or HDTV decoder
to audio output
Audio cable (option)
BNC - RCA connector (option)
No connection
Mini D-SUB 15-pin - BNC
conversion cable (option)