Filter
Top Products
EN-63
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Type LCD projector
Model XL7000U
Display technology 0.8-inch LCD panel: 3 pieces (for R,G,B)
Pixel: 1024 x 768 = 786432 pixels Total 2359296 pixels
"DUJWFQJYFMSBUFPSNPSFFBDIQBOFM
Projection lens F 1.8 - 2.6 f= 24.0 - 43.2 mm
Light-source lamp 321 W
Image size (projection distance) 40” min. to 300” max. (projection distance 1.2 to 9.1 m)
Maximum resolution Computer signal Maximum resolution: 1920 x 1200 dots (compressed)
Panel resolution: 1024 x 768 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
Component signal 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1024 x 768 dots
Computer/component video input [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Analog RGB 5 BNC 1
Digital RGB DVI-D 24-pin 1
Video input [Signal type] [Terminal type] [Line]
Video input BNC 1
S-video input S 1
Audio input [Signal type] [Terminal type] [Line]
3(#$PNQPOFOU 4UFSFPNJOJKBDL
%JHJUBM3(# 4UFSFPNJOJKBDL
Video RCA (L, R) 1
S-video RCA (L, R) 1
HDMI input [Signal type] [Terminal type] [Line]
HDMI HDMI 19-pin 1
Monitor output [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Audio output [Signal type] [Terminal type] [Line]
3(#$PNQPOFOU 4UFSFPNJOJKBDL
Speaker 10 W Mono Round type x 1
Control terminal/others
34$%46#QJO-"/3+3&.05&*/0654UFSFPNJOJKBDL
Operating temperatures
+41°F (+5°C) to +104°F (+40°C): ( Standard altitude mode: All projection angles)
+41°F (+5°C) to +86°F (+30°C): (High altitude mode: Floor installation/ceiling
installation)
Rated voltage AC 100 - 240 V, 50/60 Hz
Power consumption 5.7 A, 480 W
During standby:
AC 100 - 120 V: 5 W (when STANDBY MODE is STANDARD)
1.8 W (when STANDBY MODE is LAN)
0.2 W (when STANDBY MODE is LOW)
AC 220 - 240 V: 5 W (when STANDBY MODE is STANDARD)
1.8 W (when STANDBY MODE is LAN)
0.3 W (when STANDBY MODE is LOW)
Dimensions (not including protrusion) 481 mm (W) x 179 mm (H) x 418 mm (D) (projector only)
481 mm (W) x 179 mm (H) x 502 mm (D) (including the terminal cover)
Weight 10.5 kg (projector only), 11.0 kg (including the terminal cover)
Others S-video input Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync)
Component video
input
YC
B
C
R
: Vp-p=1.0 V 75 Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (C
B
, C
R
)
Analog input RGB: Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital input (DVI) DVI-D interface (TMDS single link) with HDCP
Digital input (HDMI) HDMI interface (TMDS single link) (Only PCM audio is supported.)
Audio input 350 mVrms, 10 kΩ or more
Replacement part (option/not included in the box)
Spare lamp: VLT-XL7100LP
Option lenses: OL-XL7100SZ, OL-XL7100LZ, OL-XL7100TZ, OL-XL7100FR