EN-9
Using the remote control
Using the wired remote control
Attached remote control for this projector can be used as a wired remote control with remote control cable. Wired
remote control is useful for operating in a distance or outside of the operating area.
REMOTE IN
REMOTE OUT
REMOTE IN
t 'PSDPOOFDUJPOVTFUIFQJOQJODBCMFPGTUFSFPUZQF
which is commercially available. However, some cable may
not work correctly.
t 8IFO3&.05&065UFSNJOBMPOUIJTQSPKFDUPSJT
connected to the REMOTE IN terminal on the other
projector, the two projectors can be controlled together by
using the remote control.
t 8IFOUIFSFNPUFDPOUSPMJTDPOOFDUFEXJUISFNPUFDPOUSPM
cable, it does not work as a wireless remote control.
t 8IFOVTJOHUIFSFNPUFDPOUSPMBTXJSFEGPSBMPOHUJNF
period, remove the batteries from it. (Dispose of the
removed batteries according to the cautions on page 6.)
You can control the projector by the
remote control signals reflected on the
screen. However, the remote control
distance may be restricted by the
light reflection loss due to the screen
characteristics.
Operate the remote control
within a distance of 30 m
(98.4 feet) from the projector,
pointing the light beam at the
remote control photo-sensor
(front or rear) of the projector.
Rear of projector
Front of projector
Vertical directions (ceiling mount)
Reception angle
Vertical directions
t ,FFQUIFSFNPUFDPOUSPMTFOTPSPVUPGEJSFDUTVOMJHIUPS
fluorescent lamp light.
t ,FFQUIFSFNPUFDPOUSPMTFOTPSBUMFBTUNGFFU
away from fluorescent lamps. Otherwise, the remote
control may malfunction.
t *GUIFSFJTBOJOWFSUFSPQFSBUFEnVPSFTDFOUMBNQOFBS
the remote control, the remote control operation may
become unstable.
t 8IFOZPVVTFUIFSFNPUFDPOUSPMUPPDMPTFUPUIF
remote control sensor, the remote control may not work
correctly.
t 8IFOUIFUFSNJOBMDPWFSJTBUUBDIFESFNPUFDPOUSPM
may not work properly from behind the projector.
Operational range of the remote control
About 30°
About 30°
About 30°
About 30°
About 20°
About 30°
About 5°
About 30°
About 20°