Filter
Top Products
EN-31
FEATURE menu
FEATURE
NORMAL
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY INPUT
PASSWORD
FUNCTION
CINEMA MODE
1.
SETUP
AUTO
OFF
AUTO
AUTO
ITEM SETTING FUNCTION
ASPECT NORMAL Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
16:9
Select to expand squeezed (or horizontally compressed) images such as DVD
images to 16:9. Press the ENTER button to make further settings such as
positioning of the displayed image and selection of signals expanded by this
function.
FULL Select to project images in full size (1024 x 768 pixels) irrespective of type of
input signal.
PASSWORD
FUNCTION
DISPLAY INPUT
/
MENU ACCESS
/
SPLASH ID SCREEN
Use to enable or cancel the password lock. See page 38 for details.
MENU POSITION 1 (upper left) / 2 (lower right) Use to change the position of the menu.
CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is
input.
Select AUTO for normal use.
When fl icker occurs on the screen, frame dropping or other incorrect display
occurs, or jaggies on slanting lines are remarkable, select either FILM or
VIDEO, which improves the symptom better.
FILM Fixed to the fi lm mode.
VIDEO The fi lm mode will not be activated.
VIDEO SIGNAL AUTO / NTSC / PAL /
SECAM / 4.43NTSC / PAL-
M / PAL-N / PAL-60
When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed correctly,
select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE
/ English / Español /
Deutsch / Français / Italiano
/
/ / /
PORTUGUÊS / SVENSKA /
POLSKI
Use to select the language used in the menus.
RESET ALL OK
Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren’t projected.
• Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.
Menu operation (continued)