Filter
Top Products
3
Chapter 2. INSTALLATION
Unpacking and Inspection......................... 3
Configuration............................................. 3
Connecting CiM-25 To Equipment............ 4
2.1 UNPACKING AND INSPECTION
Inspect shipping containers for damage. If shipping containers are damaged, keep them
until the contents of the shipment have been carefully inspected and checked for normal
operation.
Remove the packing list from the outside of the shipping carton. Open the carton and
remove the contents, checking the contents against the packing list. Verify completeness
of the shipment and that the unit functions correctly. If damage is evident, contact the
carrier and Comtech EF Data immediately and submit a damage report. Keep all shipping
materials for the carrier's inspection.
If the unit needs to be returned to Comtech EF Data, please use the original shipping
container.
2.2 CONFIGURATION
There are no internal jumpers to configure, no interface cards to install, and no other
options to install. All configuration is carried out entirely in software. The unit should
first be configured locally, using the RJ-45 Ethernet interface. The unit will ship with a
default IP address of 10.6.30.1, Gateway 0.0.0.0, and Mask 255.255.0.0. The default
Administrator Name and Password are admin and 1234 respectively. See the operations
section for details regarding configuring and administrating the CiM-25.