Filter
Top Products
CiM-25/600L IP Enabled M&C Rev. 1
Operation CD/CIM25600L.IOM
33
3.5.1.14 CHANGE HTTP PORT
Using the !PT command, the Administrator can set the HTTP Port. The command
protocol for this command is as follows:
Format: !PT <value>
Response: Command Successful
Where <value> can be any number in the range of 0 to 65535
Query Format: !PT ?
Response: !PT <value>
Notes:
1. The default port is set to 80.
2. Changes made via this command do not become active until the user has sent
a !EE command to commit the changes to EEPROM of the CiM-25.
3.5.1.15 CHANGE SNMP TRAP ADDRESS
Using the !TP command, the Administrator can set the SNMP Trap Address. The
command protocol for this command is as follows:
Format: !TP <ip_address>
Response: Command Successful
Note:
An IP Address of 0.0.0.0 disables the trap
Query Format: !TP ?
Response: !TP <ip_address>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.16 CHANGE SNMP TRAP COMMUNITY
Using the !TC command, the Administrator can set the SNMP Trap Community. The
command protocol for this command is as follows:
Format: !TC <string>
Response: Command Successful
where <string> can be 0 - 20 characters
Query Format: !TC ?
Response: !TC <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.