Monarch 9830 Printer User Manual


 
268 Word length selection must be 0 (7 bits), or 1 (8 bits).
Resend the communication settings packet or check the
DIP switch settings.
269 Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet or check the
DIP switch settings.
270 Parity selection must be 0 (none), 1 (odd), or 2 (even).
Resend the communication settings packet or check the
DIP switch settings.
271 Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet or check the DIP switch
settings.
272 Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5
(1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8
(1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11
(1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2),
14 (855- Russian), 15 (857- IBM Turkish), or 16 (860-
DOS Portuguese).
273 Cut adjustment must be -300 to 300 dots.
282 RS232 Trailer string is too long. Use a maximum of 3
characters.
283 ENQ Trailer string is too long. Use a maximum of 3
characters.
284 The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
285 The storage device type in the memory configuration
packet must be N (non-volatile RAM) or R (volatile
RAM).
286 The buffer size is invalid.
8-14
Diagnostics and Errors