Monarch 9830 Printer User Manual


 
411 Framing error. The printer cannot communicate with the
host. Make sure the host is turned on, communication
cables are connected correctly, port settings are correct,
and communications are active. Check the baud rate,
word length, and stop bits to make sure they match those
at the host. Do not toggle between Microsoft® Windows®
and MS-DOS, while using the COPY command, or you
will receive a framing error. Exit Windows before using
the COPY command. Re-transmit the data.
412 There is a problem with flow control between the printer
and the host. Make sure the printer and the host flow
control settings match (both are DTR or both are
XON/XOFF). If the error persists, call Technical
Support.
413 Online receive queue is full. Check your printer’s
XON/XOFF or DTR SETUP values to be sure there isn’t
a flow control problem.
414 The internal keyboard buffer is full or you need a new
keypad. Call Technical Support.
415 The buffer size you defined exceeds the total available
in your machine.
416 Flash/PC board error. Call Technical Support.
417 Flash memory is full. Clear flash through the 9403
printer’s menu. Resend the format, graphic, and check
digit packets. If the error reappears, call Technical
Support.
420 Internal software list error. Call Technical Support.
421 Internal software list error. Call Technical Support.
422 Duplicate internal name. Call Technical Support.
423 Internal software list error. Call Technical Support.
424 Internal software list error. Call Technical Support.
Diagnostics and Errors
8-17