Monarch 9830 Printer User Manual


 
T9. hgt mag Height magnifier,
1-7
(times). Use a magnifier of
1
with
proportionally spaced fonts, because characters lose
smoothness at higher magnifications. For the scalable font
(Font 50), the height and width refer to the point size (
4 to 90
)
of the font. For the TrueType font (font 50), the point size can
be
4
to
250
points. See Appendix B, "Fonts," for more
information about the scalable font.
T10. wid mag Width magnifier,
1-7
(times). Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field. Find your selected font and the desired width in
Appendix B, "Fonts."
NOTE:
To use large point sizes (greater than 60 point), you
must reconfigure memory and increase the size of
the scalable (vector) fonts buffer.
T11. color Options for standard printer fonts:
B
Opaque, Normal, Black, Normal
D/R/W
Opaque, Normal, White, Normal
O
Transparent, Normal, Black, Normal
Options for the Scalable Font:
A/N
Opaque, Normal, Black, Bold
B/O
Opaque, Normal, Black, Normal
E/S
Opaque, Italics, Black, Bold
F/T
Opaque, Italics, Black, Normal
There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does
not block out (or "erase") existing fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Line field
blocked out by
opaque field
using attribute B
Line field not
blocked out by
transparent field
using attribute O
3-6
Defining Fields