Filter
Top Products
Increasing Throughput
Reducing the imaging time increases throughput. You can also
increase the baud rate to increase the transmission time and
increase throughput. Make sure the communication settings at
the printer match those at the host. Using a baud rate of 19200 is
almost twice as fast as 9600 baud. Using a baud rate of 38400 is
almost twice as fast as 19200 baud.
General Format Tips and Hints
The following tips and hints are helpful to keep in mind when
designing MPCLII formats.
With Formats
◆
If you want to modify your format fields, check digit fields, and
configuration commands, use the optional entry method. This
method enables you to reset only the parameters you want to
change. Commas act as placeholders for unchanged
parameters. The optional entry method reduces file size and
increases the speed at which files are sent to the printer.
With Packets
◆
Leave parameters blank that you do not need to change when
sending online configuration packets. For example,
{
I
,A,,,,1 p
}
prints a slashed zero and uses the last sent
online system setup parameters.
Printer Optimization
9-5