Filter
Top Products
D4. decimals Number of digits to the right of the decimal. Options:
0 No digits (all printers)
1 One digit (all printers)
2 Two digits (default- all printers)
3 Three digits (all printers)
Example
{
I
,D,1,1,2 p }
Prints the dollar sign, uses a secondary symbol, and places two
digits to the right of the decimal.
Defining the Control Characters Packet
Use the control characters packet (E) to change the MPCLII
control characters, enable and disable the immediate commands,
and change the default terminator character for job requests and
ENQ’s.
Changes take effect with the first character following the end of
header character } of the configuration packet. Each control
character must be unique and cannot appear anywhere else in
your packet, except within quotation marks. You can customize
the trailer characters to work with your host.
Wait two seconds for the new characters to
take effect before sending packets using the
new characters.
Use the following syntax for the control characters packet. Notice
all but the first parameter are within quotation marks.
Syntax
{
I
,E,"ANSI_cd","string1","string2" p }
E1. E Control Characters Packet
2-16
Configuring the Printer