Filter
Top Products
NPort 5400 Series User’s Manual Web Console Configuration
5-6
password, press SEL, etc. Once the password has been entered, press SEL until the LCM screen is
activated.
Reset button protect
Setting Factory Default Necessity
No or Yes No Required
Options are No and Yes, with default = No.
NOTE: Select the Yes option to allow limited use of the Reset Button. In this case, the Reset
Button can be used for only 60 seconds. I.e., 60 sec. after booting up, the Reset Button will be
disabled automatically.
Network Settings
You must assign a valid IP address to the NPort 5410/5430/5430I/5450/5450I before it will work
in your network environment. Your network system administrator should provide you with an IP
address and related settings for your network. The IP address must be unique within the network
(otherwise, the NPort 5410/5430/5430I/5450/5450I will not have a valid connection to the
network). First time users can refer to Chapter 3, Initial IP Address Configuration, for more
information.
You can choose from four possible IP Configuration modes—Static, DHCP, DHCP/BOOTP, and
BOOTP—located under the web console screen’s IP configuration drop-down box.
Method Function Definition
Static User defined IP address, Netmask, Gateway.
DHCP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server
DHCP/BOOTP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server, or BOOTP Server assigned IP address
BOOTP BOOTP Server assigned IP address