Filter
Top Products
NPort 5400 Series User’s Manual Configuring NPort Administrator
6-28
IP Address Report
When the NPort 5400 is used in a dynamic IP environment, users must spend more time with IP
management tasks. To make things easier, the NPort 5400 can periodically report its IP address to
the IP location server, in case the address has changed. The IP location server is the host PC on
which you installed the NPort Adminustration Suite.
1. Configure the NPort 5400 with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP).
Assign the remote Auto IP report server’s IP address and UDP port.
2. Select IP Address Report and click the right mouse button to select Settings.
3. Configure the Local Listen Port to be the same as the NPort 5400’s “Auto report to UDP port”
setting.