Filter
Top Products
3-16 Intellio C218Turbo /PCI User's Manual
Port Configuration Stage
This stage displays the “MOXA Ports Installation” dialog box for the port
configuration. Here you can map the MOXA ports to the system COM numbers.
In the “MOXA Ports Installation” dialog box, the “COM Number” field of the
newly installed board is
undefined. You have to map the physical ports to COM
numbers in two ways depending on the “
Auto Enumerating COM number” check
box.
l Sequential Port Mapping: (Enable “Auto Enumerating COM number”)
Specify the COM number of the first port and subsequent ports are mapped to
continuous COM numbers. For instance, if first port is mapped to COM10,
then second port is mapped to COM11 sequentially.
l Non-sequential Port Mapping: (Disable “Auto Enumerating COM number”)
Specify the COM number for individual port. For instance, the second port can
be out of sequence, say COM18, while the first port is mapped to COM10.
Click [OK].