Filter
Top Products
Software Installation
Intellio C218Turbo /PCI User's Manual 3-19
Configuring Board and Port
If you already have installed the driver and want to re-configure the Intellio
C218Turbo/PCI board under Windows 95/98, the following is the procedure for you.
1. Click on the Taskbar [Start] button, select the [Programs] menu, and then
[
MOXA Utilities] menu and then [MOXA Configuration Panel] icon. The
configuration panel will be popped up as below.
The [
Add] button and the [Remove] button are not applicable in PCI case. A
new C218
Turbo/PCI board will be automatically found as new hardware and
added during the Windows 95/98 startup. To remove a board, simply unplug the
undesired C218
Turbo/PCI board physically from the system.
2. Click [Property] to enter “Property” dialog box to configure the selected board
with the correct “
Total Ports” and “COM Number”. Please see steps 6 to 8 in
the previous section, “Installing Driver”, for more details, except that the
“Board Type” field is not supposed to be changed.