Filter
Top Products
Software Installation
Smartio CP-104UL User’s Manual 3-7
4. Next, refer to the instructions given in the previous section, “First Time Driver
Installation” from the “Windows NT” section.
Configuring Another CP-104UL Board
In this section, we explain how to configure another MOXA CP-104UL board that is already
installed. Up to four CP-104UL boards can be installed in one system under Windows NT,
provided sufficient system resources are available.
In addition to the procedures listed below, you may also click on [Start] [Program Files]
[MOXA Utility] [MOXA Smartio/Industio Configuration Panel] [Add], and then
refer to steps 7 to 21 from the previous section, “Installing the Driver.”
1. Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.