Filter
Top Products
Smartio CP-104UL User’s Manual
3-22
4. Select Specify a location and then click on
Next to continue.
5. Insert the Moxa Driver CD into the CD-ROM
drive, and then specify the location of the file
as F:/multi_bd/software/win2k as shown
below (change the drive letter if needed).
Click OK to continue.
4. Wait while the driver software is installed.
5. The next window shows the model number of
the board, and indicates that Windows has
completed the driver installation. Click on
Finish to continue with the rest of the
installation procedure.
6. The next Found New Hardware Wizard
window to appear indicates that Windows has
identified the board’s serial ports, and is
starting to install the ports.