Software Installation
Smartio CP-104UL User’s Manual 3-17
Configuring the Board and Ports
Follow the procedures given below to re-configure the COM number for the ports of
installed boards and drivers under Windows 95/98.
In addition to following the procedures listed below, you may also click on [Start]
[Program Files] [MOXA Utility] [MOXA Smartio/Industio Configuration Panel]
[Property] [Port Setting].
Since this is a PCI board, once a new board is added, or an existing board is removed, the
board’s configuration will be automatically added or removed by the operating system when
you restart the PC.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab,
and then click on the plus sign to the left of Moxa Smartio/Industio multiport board.
2. Click on the desired
CP-104UL board, and then click on [Properties].
3. Select the [Ports Configuration] tab, click on the specific port, and then click on the
[Port Setting] button.