Filter
Top Products
Introduction
Smartio CP-168U User’s Manual 1-7
Installation Guide
This section gives a brief summary of how to install the Smartio CP-168U board under each
supported operating system. The installation is simple and involves the following stages:
Check the PCI BIOS settings.
Install the Smartio CP-168U board.
See Chapter 2, “Hardware
Installation.”
↓
Install the software from the software
CD. Configure the driver for the board
and ports.
See the respective OS section in
Chapter 3, “Software Installation.”
↓
Connect the devices with the cable.
See Chapter 5, “Connection Cables
and Cable Wiring,” for cable wiring.
↓
Restart the system.
Check the driver initialization status.
See Chapter 3, “Software
Installation,” for board init. status.
If the system restarts successfully, you
may develop your applications or
execute the desired applications.
See Chapter 4, “Serial Programming
Tools.”