Filter
Top Products
Software Installation
Smartio CP-168U User’s Manual 3-41
4. Next, refer to the instructions from the “First Time Driver Installation” subsection.
Removing an Existing CP-168U Board Configuration
First shut down your PC, and then physically remove the CP-168U board from the PCI or
PCI-X slot. The next time you start up the PC, the system will automatically remove the
configuration. There is no need to click the Remove button in the Moxa Smartio/Industio
Configuration Panel dialog box.
Updating the Driver
Take the following steps to update the Smartio CP-168U board driver.
1. Open [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapter list.
3. Click the [Remove] button in the Network dialog box.