Filter
Top Products
Software Installation
Smartio CP-168U User’s Manual 3-15
12. Insert the Moxa Driver CD into the CD-ROM
drive, and then specify the location of the file
as Software\Win2K-XP-2003 as shown
below (change the drive letter, if needed).
Click OK to continue.
13. Click on Next to continue with the
installation.
11. Wait while the wizard installs the software.
12. After all files have been copied to the system,
the Completing the Found New Hardware
Wizard window will open to indicate that it
has finished installing “Port 0.” Click on
Finish to install the board’s second port.