Filter
Top Products
3-48 Smartio CP-168U User’s Manual
Unloading the Driver
To unload (release) the driver from memory, type DP-DRV/Q at the DOS prompt.
Linux
The Linux driver for MOXA’s multiport serial boards supports the following products:
! Universal PCI Boards: CP-168U, CP-104UL, CP-104JU, CP-134U, CP-134U-I, CP-
132UL, CP-132UI
! PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI, CP-114, CP-114I, CP-114S, CP-
114IS, CP-132, CP-132I, CP-132S, CP-132IS
! ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS,
CI-134, CI-134I, CI-134IS, CI-132, CI-132I, CI-132IS
! cPCI Boards: CT-114I
The following steps are using CP-168U as an example.
Follow the steps below to install the driver under Linux.
1. # mkdir moxa
# cd moxa
# tar xvfz mxser.tgz
2. #cd mxser
#make clean; make install
3. # cd /moxa/mxser/driver
# ./msmknod
4. # modprobe mxser
(If you install ISA Boards, please type commend # insmod mxser ioaddr=0x???, 0x???,
0x???, 0x??? <- 1st ISA, 2nd ISA, 3rd ISA, 4th ISA)
Using /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o
Warning: loading /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o will taint the
kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
MOXA Smartio/Industio family driver version 1.7
Tty devices major number = 30, callout devices major number = 35
Found MOXA CP-168U series board(BusNo=2,DevNo=13)
Module mxser loaded, with warnings