Filter
Top Products
3-24 Smartio CP-104UL User’s Manual
NOTE
If an error message similar to “CP-168U board(BusNo=x, DevNo=x, Port1=COMx) interrupt
number is invalid!” pops up, refer to the “Troubleshooting” chapter for solutions.
If you want to add more boards after installing the driver, simply plug the additional Smartio CP-
168U board into an empty PCI slot, and Windows 95/98 will automatically detect the newly
plugged board. Skip to Port Configuration to take care of port settings.
This completes the installation of the Smartio CP-168U board driver, including board and port
configuration. However, if you need to make changes to the board and port configuration, refer to
the next section, “Configuring Board and Port,” for configuration details.
Once the board and the driver are installed and the driver restarts successfully, you can start to
develop applications with the PComm library (see “Serial Programming Tools”) or the Microsoft
Win32 API. You can also use applications such as Terminal Emulator (see “Serial Programming
Tools”), a PComm utility, or HyperTerminal, to transmit/receive data, as well as Remote Access
Service to provide dial-up networking capabilities.
Configuring the Board and Ports
Follow the procedures given below to re-configure the COM number for the ports of installed
boards and drivers under Windows 95/98.
In addition to following the procedures listed below, you may also click on [Start] " [Programs]
" [MOXA Utility] " [MOXA Smartio/Industio Configuration Panel] " [Property] " [Port
Setting].
Since this is a Universal PCI or PCI board, once a new board is added, or an existing board is
removed, the board’s configuration will be automatically added or removed by the operating
system when you restart the PC.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and
then click on the plus sign to the left of Moxa Smartio/Industio multiport board.