Filter
Top Products
3-34 Smartio CP-104UL User’s Manual
Updating the Driver
Take the following steps to update the Smartio CP-168U board driver.
1. Open [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapter list.
3. Click the [Remove] button in the Network dialog box.
4. Click the [Close] button in the Network dialog box.
5. Restart the system.
6. Refer to the instructions given in the “First Time Driver Installation” section to install the new
driver.
Removing the Driver
To remove the Smartio CP-168U board driver:
1. Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.
2. Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.
3. Click the [Remove] button in the Network dialog box.
4. Click the [Close] button to exit the Network dialog box.
5. Restart the system to activate the new configuration.