Filter
Top Products
Software Installation
Smartio CP-104UL User’s Manual 3-29
Installing the Driver
First Time Driver Installation
The following procedure shows how to install the Smartio CP-168U driver for the first time. First
make sure the board or boards are already plugged into the system’s PCI slot(s).
1. Log into NT as Administrator.
2. Copy the folder Windows.nt located under \Software\WinNT on the software CD, to your
computer’s hard disk (under the C: drive, for example).
3. Open the [Control Panel], click the [Network] icon, and then select the [Adapters] tab.
4. Click the [Add] button, and then the [Have Disk...] button in the [Select Network Adapter]
dialog box.
5. Specify the exact path of the driver diskette, C:\Windows.nt in the example shown here, and
then click [OK] to proceed.
6. Select MOXA Smartio/Industio Family multiport board in Select OEM Option dialog box,
and then click [OK] to start installing the driver.
7. The Moxa Smartio/Industio Configuration Panel dialog box appears. Click the [Add] button to
open the Property dialog box to change port settings and advanced FIFO configuration done
automatically by the system.