Filter
Top Products
MOXA EtherDevice Switch Hardware Installation Guide
3
-
8
NOTE 1. The pin numbers for male DB9 and DB25 connectors, and
hole numbers for female DB9 and DB25 connectors are
labeled on the connector. However, the numbers are
typically quite small, so you may need to use a magnifying
glass to see the numbers clearly.
2. The pin numbers for both 8-pin and 10-pin RJ45
connectors (and ports) are typically not labeled on the
connector (or port). Refer to the Pinout and Cable Wiring
diagrams below to see how RJ45 pins are numbered.
RS-232 Connection
MOXA EDS-508 has one RS-232 (10-pin RJ45) console port, located on
the top panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable (see the
cable wiring diagrams below) to connect MOXA EDS-508’s console port
to your PC’s COM port. You may then use a console terminal program,
such as MOXA PComm Terminal Emulator, to access MOXA EDS-508’s
console configuration utility.
RJ45 (10-pin) Console Port Pinouts