Filter
Top Products
Hardware Overview
MOXA EtherDevice Switch Hardware Installation Guide
4
-
3
LED Indicators
The front panel of MOXA EDS-508 contains several LED indicators. The
function of each LED is described in the table below.
LED Color State Description
On Power is being supplied to power input P1
PWR1
AMBER
Off Power is not being supplied to power input P1
On Power is being supplied to power input P2
PWR2
AMBER
Off Power is not being supplied to power input P2
On
When the user-configured warning event is
enabled, and a user-configured ev ent is triggered
FAULT
RED
Off
When the user-configured warning event is
enabled, and a user-configured event is not
triggered or when user-configured warning event
is disable.
On
When this EDS-508 becomes the Master of this
Turbo Ring
MASTER
GREEN
Blinking
When this EDS-508 becomes Ring Master of this
Turbo Ring and the Turbo Ring was broken.
On
When this EDS-508 enables the coupling
function to form a back-up path
COUPLER
GREEN
Off
When this EDS-508 disables the coupling
function
On TP port’s 10 Mbps link is active
Blinking
Data is being transmitted at 10 Mbps
10M GREEN
Off TP Port’s 10 Mbps link is inactive
On TP port’s 100 Mbps link is active
Blinking
Data is being transmitted at 100 Mbps
100M
(TP)
GREEN
Off 100BaseTX Port’s link is inactive