Filter
Top Products
section
1
2
3
4
5
6
7
8
4
9
9
Install the Hardware
1. Connect the included Ethernet network cable into the LAN port
on the back of the Wireless G Ethernet Adapter and plug the
other end of the cable to the back of your computer or any
other Ethernet-enabled device.
2. Turn on your Adapter by connecting the power supply cable to
your Adapter. Then plug the other end into a power outlet.
3. If used for Internet gaming play, the Adapter will work out-of-
the-box in most instances. In cases where you need to set up
the Adapter for head-to-head play or special settings, you need
to run the setup wizard from a PC or configure it using a web-
based setup. Non-Windows users, please refer to the “Setting
Up your Computer to Use Web-Based Setup” on page 16 of
this manual.
Knowing your Wireless G Ethernet Adapter