Filter
Top Products
section
1
2
3
4
5
6
7
8
1313
Connecting the Adapter Using the Setup Wizard
13
Connecting the Adapter Using the Setup Wizard
Connecting the Adapter Using the Setup Wizard
9. Enter the settings for the wireless network that you will be connecting
to. The default SSID of “ANY” will connect your Adapter to the closest
network automatically. After you finish entering the settings, click
“Next” to continue.
a. SSID:
The SSID is the wireless network name. This field lets you type
in the network name (SSID) you want this Adapter to connect
to. For instance, if the name (SSID) of the wireless network that
you will be connecting to is “belkin54g”, enter “belkin54g” in the
SSID field.
b. Channel:
If you chose to connect in Ad-Hoc mode, you will need to
specify the channel number.
c. Device (Adapter) Name:
Enter a name for this Adapter.
10. Enter the IP address settings for your Adapter. The current settings
will usually work. Click “Next” to continue.
Warning: It is recommended that you only make changes to this page
if you have a specific reason to do so.
a. IP address:
IP address must be unique to your network. Default IP address is
192.168.2.225.
a
b
c