Filter
Top Products
Index
Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide 58
–STE= - Set Telephony Extension, 25
Synchronous Access Mode Commands, 31
T - Set Tone Dial Default, 22
Table of Result Codes, 16
Table of Supported V.80 Commands, 20
-TRV – Tip and Ring Voltage Measurement, 34
-TTE - Threshold Adjustments for Telephony Extension,
34
W - Connect Message Control, 15
X - Extended Result Codes, 16
Z - Soft Reset and Restore Profile, 12
V.22bis S-Parameters, 35
V.22bis S-Registers
Result Codes, 45
S0 - Number of Rings to Auto-Answer, 37
S1 - Ring Counter, 37
S10 - Lost Carrier To Hang Up Delay, 38
S11 - DTMF Tone Duration, 38
S12 - Escape Prompt Delay (EPD), 38
S14 - General Bit Mapped Options Status, 38
S16 - Test Mode Bit Mapped Options Status, 39
S19 - Reserved, 39
S2 - Escape Character, 37
S20 - Reserved, 39
S21 - V.24/General Bit Mapped Options Status, 39
S22 - Speaker/Results Bit Mapped Options Status, 40
S23 - General Bit Mapped Options Status, 40
S24 - Sleep Inactivity Timer, 40
S25 - Delay To DTR Off, 40
S26 - RTS to CTS Delay, 40
S27 - Bit Mapped Options Status, 41
S28 - Bit Mapped Options Status, 41
S29 - Flash Dial Modifier Time, 41
S3 - Carriage Return Character, 37
S30 - Disconnect Inactivity Timer, 41
S31 - Bit Mapped Options Status, 41
S36 - LAPM Failure Control, 42
S37 - Desired Line Connection Speed, 42
S38 - Delay Before Forced Hang Up, 42
S39 - Flow Control Bit Mapped Options Status, 42
S4 - Line Feed Character, 37
S40 - General Bit Mapped Options Status, 42
S41 - General Bit Mapped Options Status, 43
S48 - V.42 Negotiation Action, 43
S5 - Backspace Character, 37
S7 - Wait Time for Carrier, Silence, or Dial Tone, 37
S8 - Pause Time For Dial Delay, 38
S82 - Break Handling Options, 43
S86 - Call Failure Reason Code, 43, 44
S9 - Carrier Detect Response Time, 38
S95 - Extended Result Codes Control, 44
Summary of S-Parameter Defaults, 36
Summary of S-Parameter Definitions, 37
W - Connect Message Control, 15
X - Extended Result Codes, 16
Z, 12