Filter
Top Products
30
MT2834ZPX Owner's Manual
COMMAND: I9
VALUES: N/A
DEFAULT: Read Only Command
DESCRIPTION:
The
I9
command is a query to display this modem's
characteristics when operating within Windows 95.
Entering
ATI9
<cr> invokes
ZPX 28800 FAX CT
on your video monitor.
(The response to the query reveals that this modem is a
ZPX, 28.8K, FAX and Class Two capable device.)
COMMAND: L
VALUES: 5, 6, 7, 8, 9, 10 and 11
DEFAULT: Read Only Command
DESCRIPTION:
L5
lists all current operating parameters.
L6
lists all current S-Register values.
L7
lists additional parameters.
L8
lists current on-line diagnostics.
L9
displays Signal Strength Information.
L10
displays Signal to Noise Ratio
Information.
L11
displays Noise Information.
COMMAND: #L
n
VALUES: n = 0 thru 3
DEFAULT: #L0
DESCRIPTION:
#L0 selects modems to negotiate V.42 Mode.
#L1 selects MNP on and LAP-M off.
#L2 selects LAP-M on and MNP off.
#L3 selects no detection phase, go directly to LAP-M.