Filter
Top Products
46
MT2834ZPX Owner's Manual
Result Codes
The MT2834ZPX Command mode provides you with several
responses, or
“Result Codes”
, that can aid you in Command mode
operation. These Result Codes are displayed on your video monitor.
AT&Q0
selects Multi-Tech responses with Reliable/LAP-M/
Compressed modifiers. The terse result code for
CONNECT 2400
is
9.
AT&Q1
selects Standard AT command set responses. The terse
result code for
CONNECT 2400
is
10
. The following tables list result
codes generated by the
&Q
command.
Table 4-2 &Q0 "Multi-Tech" Result Codes
TERSE VERBOSE
0OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5* CONNECT 1200
6 NO DIALTONE
7 BUSY
8 NO ANSWER
9* CONNECT 2400
11* CONNECT 4800
12* CONNECT 9600
13* CONNECT 14400
19* CONNECT 19200
21* CONNECT 21600
24* CONNECT 24000
26* CONNECT 26400
28* CONNECT 28800
31* CONNECT 31200
33* CONNECT 33600
* With MNP error correction on, RELIABLE (or R) is added to these
result codes. With LAP-M error correction on, LAP-M (or L) is added
to these result codes. With data compression on, COMPRESSED (or
C) is added. (Note these
"Extended"
Result Codes are displayed when
your modem is set-up to do so with an X1, X2, X3, or X4 command.)