Filter
Top Products
7
Chapter 1 - Introduction and Description
How to Use This Manual
This manual is divided into seven chapters and two appendices. The
information contained in each chapter and appendix is as follows:
Chapter 1 - Introduction and Description
Chapter 1 begins with a short product introduction and description;
followed by a guide (which you are now reading) to the use of this
manual.
Chapter 2 - Installation and Connection
Chapter 2 documents the procedure for connecting the MT2834ZPX to
your computer and to the phone line. Details are given, supported by
illustrations on determining Base I/O addressing and setting IRQ
values as a guide for installing your MT2834ZPX to the point of
operation.
Chapter 3 - Software Configuration
Chapter 3 documents communication software configuration
recommended specifically for the MT2834ZPX. There is also some
discussion of how to identify the limitations and capabilities of your
computer before the software installation process is done. Some other
issues covered in this chapter include setting up initialization strings,
changing default parameters, configuring software for the remote
system and file transfer protocols.
Chapter 4 - "AT" Commands and S-Registers
This chapter focuses on the use of “AT” commands and S-Registers.
Chapter 4 provides basic steps for originating and answering calls and
a summary of commands that enable the user to establish, read, and
modify parameters in addition to dialing.
Chapter 5 - Troubleshooting Your MT2834ZPX
Chapter 5 lists some basic and specific actions to take if your
MT2834ZPX is not operational.